smartpro 1.5kva line interactive sine wave ups, snmpwebcard option, tower, usb, serial, 100/110/120v model number: SMART1500SLT description 1500va line-interactive tower ups system for server, networking and telecommunications equipment. upright tower form factor. offers sine wave 100v, 110v or 120v nominal output in both ac and battery modes. switches to battery-derived ac output during power failures and extreme voltage variations. line-interactive automatic voltage regulation (avr) provides voltage boost/cut during brownouts/overvoltages to maintain regulated 100v, 110v or 120v nominal output over an input voltage range of 95-145v. includes nema 5-15p input plug and 8 ups-supported nema 5-15r output receptacles. network-grade ac surge and noise suppression. network management interfaces support simultaneous communications via usb port, db9 serial port and snmpwebcard slot. hid-compliant usb interface enables integration with built-in power management and auto shutdown features of windows and mac os x. supports simultaneous detailed monitoring of equipment load levels, self-test data and utility power conditions via all 3 network interfaces. includes poweralert monitoring software and complete cabling. three-stage metered current monitoring and battery charge status leds. data line surge suppression for dialup, dsl or network ethernet connections. utility power and voltage regulation leds. audible alarm. self-test. field-replaceable, hot-swappable internal batteries. attractive all-black color scheme. features smart 1500slt line-interactive ups offers battery derived sine wave ac output during power outages, voltage regulation during brownouts and overvoltages, plus network-grade ac surge suppression 1500va/900 watt power handling capability with full-time sine wave output offers guaranteed compatibility with networking, telecom and other sensitive electronic devices large internal batteries offer runtimes of 17 minutes at half load (750va/450 watts) and 6 minutes at full load (1500va/900 watts) automatic voltage regulation (avr) circuits maintain user-selectable 100, 110, 120 or 127v nominal output over an input voltage range of 91 to 145v includes 8 fully-protected nema 5-15r output receptacles arranged in a single load bank that can be powered off and back on again via software interface poweralert ups monitoring and unattended shutdown software enables configurable network broadcast messaging, pager & email notification, event logging and running user-defined script commands offers simultaneous monitoring by up to 3 directly-connected devices through included usb, db9 and snmp* interfaces (*requires optional snmpwebcard), or the monitoring of any number of additional ups systems over ip with included poweralert monitoring software. highlights 1.5kva / 1500va line interactive tower ups; sine wave output 100/110/120v output, corrects brownouts and overvoltages usb, rs232 and slot for optional snmp/web card detailed status leds, single line tel / dsl surge suppression nema 5-15p input, 8 5-15r outlets package includes smart 1500slt ups system poweralert software cd-rom usb and serial cabling 1 / 6
communications ports support messaging of ups and line power status, including on-battery, low-battery, power restored, ac line voltage, dc battery voltage and remaining battery capacity supports timed inverter shutoff after unattended shutdown, activate self-test and ups output power control for scheduled or immediate reboot of connected equipment supports tripp lite's watchdog software application to restore unresponsive programs by systematically restarting applications, operating systems and ultimately rebooting completely locked computers by momentarily switching ups power off and back on again (requires optional watchdogsw) leds offer continuous detailed status information of ups operating parameters and site power quality hot-swappable batteries allow on-site battery replacement without powering off connected equipment specifications output output volt amp capacity (va) 1500 output kva capacity (kva) 1.5 output watt capacity (watts) 900 output power factor 0.6 nominal output voltage(s) supported 100v; 110v; 120v nominal voltage details 120v default (voltage selection via back panel switches) frequency compatibility 50 / 60 hz output voltage regulation (line mode) -13%, + 15% output voltage regulation (battery mode) +/- 5% built-in ups output receptacles 8 5-15r outlet(s) output ac waveform (ac mode) sine wave output ac waveform (battery mode) pure sine wave input rated input current (at maximum load) 10.1a (100v), 9.3a (110v), 8.6a (120v) nominal input voltage(s) supported 100v ac; 110v ac; 120v ac ups input connection type 5-15p ups input cord length (ft.) 6 ups input cord length (m) 1.8 recommended electrical service 15a 120v phase single-phase battery full load runtime (minutes) 8 min. (900w) 2 / 6
half load runtime (minutes) 20 min. (450w) dc system voltage (vdc) 36 battery recharge rate (included batteries) less than 8 hours from 10% to 90% replacement battery cartridge (internal ups battery replacement) rbc36-slt battery access battery access door battery replacement description hot-swappable, user replaceable batteries voltage regulation voltage regulation description automatic voltage regulation (avr) maintains line power operation with an input voltage range of 95 to 145 (120v), 87 to 133 (110v), 83 to 121 (100v) overvoltage correction voltage reduction of 12% applies when input is 127 to 145 (120v), 116 to 133 (110v), 111 to 121 (100v) undervoltage correction voltage boost of 14% applies when input is 95 to 108 (120v), 87 to 99 (110v), 83 to 90 (100v) leds alarms & switches led indicators status leds indicate line power, battery power, avr, overload and replace battery status - with a 3-led level meter for load and battery charge level site wiring fault indication rear panel site wiring fault led alarms audible alarm indicates power failure and overload conditions alarm cancel operation power-fail alarm can be silenced using alarm-cancel switch switches 2 switches control off/on power status and alarm-cancel/self-test operation; rear panel protected switches support nominal voltage selection surge / noise suppression ups ac suppression joule rating 690 ups ac suppression response time instantaneous ups dataline suppression 1 line tel/dsl (1 in / 1 out); 10/100base t ethernet emi / rfi ac noise suppression yes physical installation form factors supported with included accessories tower primary form factor tower ups / power module dimensions in primary form factor (height x width x depth / inches) 10.2 x 6.8 x 13.2 ups / power module dimensions in primary form factor (height x width x depth / cm) 26 x 17.1 x 33.7 ups / power module weight (lbs) 45 3 / 6
ups / power module weight (kg) 20.4 ups shipping dimensions (height x width x depth / inches) 14 x 9.8 x 18.5 ups shipping dimensions (height x width x depth / cm) 35.6 x 24.8 x 47 shipping weight (lbs) 49.2 shipping weight (kg) 22.3 cooling method fan ups housing material steel environmental operating temperature range +32 to +104 degrees fahrenheit / 0 to +40 degrees celsius storage temperature range +5 to +122 degrees fahrenheit / -15 to +50 degrees celsius relative humidity 0 to 95%, non-condensing ac mode btu / hr. (full load) 161.1 battery mode btu / hr. (full load) 498.1 ac mode efficiency rating (100% load) 95% audible noise audible noise < 50 dba at front side 1 meter communications communications interface usb; db9 serial; slot for snmp/web interface network monitoring port description supports detailed monitoring of ups and site power conditions poweralert software included communications cable usb and db9 cabling included watchdog compatibility supports watchdog application, os and hard-reboot restart options for remote applications line / battery transfer transfer time 4-6 milliseconds low voltage transfer to battery power (setpoint) 95v (120v), 87v (110v), 83v (100v) high voltage transfer to battery power (setpoint) 145v (120v), 133v (110v), 121v (100v) special features cold start (startup in battery mode during a power failure) cold-start operation supported high availability ups features hot swappable batteries green & high efficiency features greater than 95% efficiency - green ups 4 / 6
certifications ups certifications tested to ul1778 (usa); tested to csa (canada); tested to nom (mexico); meets fcc part 15 category a (emi) warranty product warranty period (worldwide) 2-year warranty, 3 year with registration. note: registration is required for 3-year warranty. connected equipment insurance (u.s., canada & puerto rico) $250,000 ultimate lifetime insurance related items optional products model number description qty. snmpwebcard for remote monitoring and control via snmp, web, or telnet. 1 envirosense monitors temperature, humidity and contact-closure inputs. (requires snmpwebcard or switched pdu.) 1 modbuscard for remote monitoring and control via modbus protocol 1 wext5-500-1500 5-year extended warranty - for smart line-interactive and online tower or rack models, 1500va or less 1 rbc36-slt ups replacement battery cartridge for select tripp lite slt ups 1 watchdogsw watchdog service monitoring / reboot software 1 pdub15 dual source power distribution unit / pdu with manual transfer switch enables hot-swappable ups replacement in critical network applications 1 pdu1215 basic pdu / power distribution unit - safe, reliable power distribution for critical networking equipment 1 pdunv basic pdu / power distribution unit - safe, reliable power distribution for critical networking equipment 1 pdumh15 metered pdu / power distribution unit - safe, reliable power distribution with digital current meter 1 pdumh15at metered pdu with ats - power distribution unit with dual-input auto transfer switching 1 pdumnh15 monitored pdu / power distribution unit supports real-time remote monitoring of load level, voltage and frequency with options for remote environmental and security monitoring 1 pdumnv15 monitored pdu / power distribution unit supports real-time remote monitoring of load level, voltage and frequency with options for remote environmental and security monitoring 1 pdumh15atnet switched, metered pdu with ats - power distribution unit with dual-input auto transfer switching, individual outlet control and remote network interface 1 pdumv15net switched, metered pdu with remote monitoring - 0u vertical rackmount power distribution unit for networks with individually switchable outlets, current metering, remote monitoring and control 1 p007-002 2-ft. heavy-duty 14awg power cord (iec-320-c13 to nema 5-15p) 1 p007-006 6-ft. heavy-duty 14awg power cord (iec-320-c13 to nema 5-15p) 1 5 / 6
p007-010 10-ft. heavy-duty 14awg power cord (iec-320-c13 to nema 5-15p) 1 p010-012 12-ft. 18awg power cord (nema 5-15p to iec-320-c13) 1 p022-001 1-ft. 18awg power extension cord (nema 5-15r to nema 5-15p) 1 p023-001 1-ft. 14awg power adapter cord (nema l5-15r to nema 5-15p) 1 p034-010 10-ft. 14awg heavy duty power cord ( iec-320-c19 to nema 5-15p) 1 relayiocard programmable relay i/o card 1 more information, including related products, owner's manuals, and additional technical specifications, can be found online at: http://www.tripplite.com/sku/SMART1500SLT . ? 2014 tripp lite. all rights reserved. all trademarks are the sole property of their respective owners. tripp lite has a policy of continuous improvement. specifications are subject to change without notice. photos may differ slightly from final products. 6 / 6
mouser electronics authorized distributor click to view pricing, inventory, delivery & lifecycle information: tripp lite: ? SMART1500SLT
|
